26 Dec Tile and Grout Cleaning – LAVTY Cleaning Service
San Diego Tile and Grout Cleaning by LAVTY Cleaning
Tile and grout cleaning can be a real challenge for those that do not possess the right equipment to make the job go quickly, easily and smoothly.
In fact, this can be a very difficult job without the proper machinery, cleaning supplies and years of experience knowing how to properly clean grout and tiles.
LAVTY Tile and Grout Cleaning is happy to lend a helping hand. We have been cleaning tiles and grout for many years, and we are experts at the entire process.
If you’d like a free quote, don’t hesitate to give us a call 858-925-9955 today.
We will estimate exactly how much it will cost to get the job done.
Here’s the typical process for LAVTY Tile and Grout Cleaning …
Tile and Grout Pre-Treating Phase:
The name is self-explanatory. Before we begin the cleaning process, it is best to have the tiles and grout undergo a pre-treating phase. This will ensure that the job is completed correctly.
First, we can lay down an alkaline-based degreasing solution. We will mop this on to the tiles and grout and ensure that we cover the entire floor for optimal cleaning purposes.
Next, we leave the alkaline solution on the tiles for up to 20 minutes so that it soaks in and really cuts through the dirt and grime.
Finally, once the solution has settled into the tile and grout it begins to loosen up the dirt and grime. We can then wipe down the residue and go through the rest of the cleaning process.
Power Scrubbing the Tiles Phase:
When cleaning tiles, it’s important to really cut through all of the grime, dirt and build up. The best way to do that is through power scrubbing. This is ideal because the brushes really work their way through the grime buildup on the tile surface.
And here’s another added bonus…
The power scrubbing brushes will also penetrate the grout lines as well. This ensures that the grout is properly cleaned and maintained.
The Turbo Rinsing Phase:
Now that all of the scrubbing has taken place, it’s time to really make the tiles and grout shine. We use pressure-heated water to rinse down the tiles and grout, remove all of the dirt, and grime buildup that has been scrubbed off during the power-scrubbing phase.
Next, it’s time to extract all of the dirty water. This is done in one process and it’s easily accomplished when you have the right machinery and tools to get the job done.
We have no problem taking care of this at LAVTY Tile and Grout Cleaning. Don’t hesitate to give us a call if you need our help. We’re happy to provide a free quote.
The Repeating Phase:
This is where you truly get the most bang for your buck.
Instead of going over the tiles and grout LAVTY Cleaning once, we go above and beyond the call of duty to repeat the process again.
This ensures that you truly have the cleanest tile and grout possible after we are through.
Speed Dry and Inspection Phase:
Finally, it’s time to speed dry the tiles and grout and then inspect our work. So that’s exactly what we do in this phase.
If you think we can help, please call 858-925-9955 LAVTY Cleaning today. The number is prominently displayed at the top of this website. We look forward to hearing from you.